ECONOMICAL MOTOR MECHANISM FRAMES 250A
MCCB motors are basically used for remote control of MCCBs. The way it works is that these products are mounted on MCCB and they add the feature of remote control to the MCCB.
This model is used for MCCB up to 250A.
MCCB motos use 14W power consumption and are supplied by 230V voltage.
Terminals P1 and P2 are related to motor power and terminals S1, S2 and S4 are related to the controlling MCCB.
There is an interlock between the manual lever and the remote control.
These products can be installed and mounted on the MCCB front and provide the ability to connect, disconnect and trip the MCCB remotely.
In order to install the motor on MCCB, a professional technician must do this carefully by removing the frontal plate and cover of the knob, make sure that the motor is well mounted and fixed on the switch in OFF mode.
The earth terminal of the MCCB motors must be connected to the ground network.
Please turn the manual lever according to the instructions.